%
(180721)
(   post run on asr at 1633 of 26_7) 
(   moved safego  depth to just after )
(   G01 X[2.3983 *#<scale>] Y[4.318 *#<scale>] Z#<depth>)
(180715)
(   adjust after bad run on ASR nexGen09)
(   see 026_03_Heart_blank_880_tabs.ngc for history)
(   Created with emc2b post processor 2018/07/14 19:17)
(   reset tool change to 1/8 inch End Mill .125 dia and *#<scale>] Z2.321 )
(   employs 879_heart_005_coupled.ngc)
(   Created with emc2b post processor 2018/07/15 13:57)
(   added double tabs for bottom layers)



(^^^^ Begin Abstracted from 182_nameplate.ngc)

#<sheet_thick>        =  0.190 ;180601  .25   ;180507 want .003 depth of cut

;Basic work setup from basicCylinder_008_003_ngc
;Milling
#<passesneeded> = 4 (number of times to go around)
(passdepth = sheet_thick/passesneeded );  depth of a single pass
#<passdepth>    = [#<sheet_thick> / #<passesneeded>]





#<safego>        = 0.2000

#<scale>=.7



G40	; disable tool radius compensation
G49	; disable tool length compensation
G80	; cancel modal motion
G54	; select coordinate system 1
G90	; disable incremental moves
G20	; change from metric
F30	; set feedrate
S1000	; set spindle speed
G61	; exact path mode
;G17	;180601  from pyheeksG17 



(*************)
(Prep for engrave)
(Begin engrave)
(end engrave)




G00 G53 X0 Y0 Z0
(go to home)
G0 Z3 ;180218 manually added to load T16 gracefully
T16 M06 
G04 P3.0	; wait for 3.0 seconds

(start four step process loop)
G0 Z#<safego>
(go to home)
;G0 G53 X[0 *#<scale>] Y[0 *#<scale>] Z0 ; 180218 manually added
;G0 Z3 

(cut shape in 4 passes)
#<i>      = 0; #302
#<zvalue> = -1; #303
#<depth>  = 0
o151 while [#<i> lt [#<passesneeded>]]
#<i> = [#<i> + 1]
#<depth> = [#<i> * #<passdepth> * #<zvalue>]
;180605 (MSG, Pass #<depth>)
#<tabdepth> = #<depth>
#<tabdepthstep> = #<depth>
#<mulfactor> = .5
(set values and messages for each step)
o152 if[#<i> EQ 1]
(MSG, Pass 1 at -.0475)
o152 elseif [#<i> EQ 2]
(MSG, Pass 2 at -.0925)
o152 elseif[#<i> EQ 3]
(MSG, Pass 3 at -.1425)
o152 else ;must be 4th pass
(MSG, Pass 4 at -.190)
; 3 * 190/4 *(-1)  cal: -.1425
#<tabdepth> = [3 * #<passdepth> * #<zvalue>]; arbitary select tab for third layer for its thickness
; ((-.190) + (-.1425))* .5 cal: -.16625
#<tabdepthstep> = [[#<depth> + #<tabdepth>] * #<mulfactor>]; works with [-.16625];
o152 endif


(blank)
(heart_top)
G00 X[2.6345 *#<scale>] Y[3.8184 *#<scale>] 
G01 Z#<safego>  F3.93
G02 X[2.5566 *#<scale>] Y[3.8071 *#<scale>] I[-0.0389*#<scale>] J[-0.0056*#<scale>]
G01 X[2.5436 *#<scale>] Y[3.896 *#<scale>] Z#<safego>
G03 X[2.5401 *#<scale>] Y[3.9134 *#<scale>] Z#<safego> I[-0.1608*#<scale>] J[-0.0233*#<scale>]
G01 X[2.5027 *#<scale>] Y[4.0581 *#<scale>] Z#<safego>
G03 X[2.4965 *#<scale>] Y[4.0771 *#<scale>] Z#<safego> I[-0.1573*#<scale>] J[-0.0407*#<scale>]
G01 X[2.4241 *#<scale>] Y[4.2605 *#<scale>] Z#<safego>
G03 X[2.4142 *#<scale>] Y[4.2811 *#<scale>] Z#<safego> I[-0.1511*#<scale>] J[-0.0596*#<scale>]
G01 X[2.3002 *#<scale>] Y[4.4819 *#<scale>] Z#<safego>
(need break depth here)
G03 X[2.2849 *#<scale>] Y[4.5042 *#<scale>] Z#<depth> I[-0.1413*#<scale>] J[-0.0802*#<scale>]
G01 X[2.1264 *#<scale>] Y[4.699 *#<scale>]  Z#<depth>
G03 X[2.1038 *#<scale>] Y[4.7217 *#<scale>] Z#<depth> I[-0.126*#<scale>] J[-0.1025*#<scale>]
G01 X[1.9029 *#<scale>] Y[4.8874 *#<scale>] Z#<depth>
G03 X[1.8715 *#<scale>] Y[4.9078 *#<scale>] Z#<depth> I[-0.1034*#<scale>] J[-0.1253*#<scale>]
G01 X[1.6348 *#<scale>] Y[5.0247 *#<scale>] Z#<depth>
G03 X[1.5952 *#<scale>] Y[5.0383 *#<scale>] Z#<depth> I[-0.0719*#<scale>] J[-0.1456*#<scale>]
G01 X[1.3333 *#<scale>] Y[5.0916 *#<scale>] Z#<depth>
G03 X[1.2898 *#<scale>] Y[5.0945 *#<scale>] Z#<depth> I[-0.0324*#<scale>] J[-0.1592*#<scale>]
G01 X[1.0165 *#<scale>] Y[5.0758 *#<scale>] Z#<depth>
G03 X[0.9746 *#<scale>] Y[5.0673 *#<scale>] Z#<depth> I[0.011*#<scale>] J[-0.1621*#<scale>]
G01 X[0.7395 *#<scale>] Y[4.9863 *#<scale>] Z#<depth>
X[0.7061 *#<scale>] Y[4.9748 *#<scale>] Z#<tabdepthstep>
G03 X[0.6699 *#<scale>] Y[4.9571 *#<scale>] Z#<tabdepthstep> I[0.0529*#<scale>] J[-0.1536*#<scale>]
G01 X[0.6015 *#<scale>] Y[4.9123 *#<scale>] Z#<tabdepth>
X[0.4228 *#<scale>] Y[4.7951 *#<scale>] Z#<tabdepth>
G03 X[0.3938 *#<scale>] Y[4.7709 *#<scale>] Z#<tabdepth> I[0.089*#<scale>] J[-0.1358*#<scale>]
G01 X[0.1843 *#<scale>] Y[4.5492 *#<scale>] Z#<tabdepth>
G03 X[0.1623 *#<scale>] Y[4.52 *#<scale>] Z#<tabdepth> I[0.118*#<scale>] J[-0.1116*#<scale>]
G01 X[0.1461 *#<scale>] Y[4.4926 *#<scale>] Z#<tabdepth>
X[0.0663 *#<scale>] Y[4.3569 *#<scale>] Z#<depth>
X[0.0043 *#<scale>] Y[4.2516 *#<scale>] Z#<depth>
G03 X[-0.0105 *#<scale>] Y[4.2184 *#<scale>] Z#<depth> I[0.14*#<scale>] J[-0.0824*#<scale>]
G01 X[-0.106 *#<scale>] Y[3.9178 *#<scale>] Z#<depth>
G03 X[-0.1131 *#<scale>] Y[3.8822 *#<scale>] Z#<depth> I[0.1548*#<scale>] J[-0.0492*#<scale>]
G01 X[-0.1155 *#<scale>] Y[3.8531 *#<scale>] Z#<depth>
X[-0.1287 *#<scale>] Y[3.6962 *#<scale>] Z#<tabdepth>
X[-0.1399 *#<scale>] Y[3.5637 *#<scale>] Z#<tabdepth>
G03 X[-0.1389 *#<scale>] Y[3.5282 *#<scale>] Z#<tabdepth> I[0.1619*#<scale>] J[-0.0135*#<scale>]
G01 X[-0.0948 *#<scale>] Y[3.204 *#<scale>] Z#<tabdepth>
G03 X[-0.0872 *#<scale>] Y[3.1723 *#<scale>] Z#<tabdepth> I[0.161*#<scale>] J[0.0219*#<scale>]
G01 X[-0.0553 *#<scale>] Y[3.0811 *#<scale>] Z#<tabdepth>
X[-0.0034 *#<scale>] Y[2.9324 *#<scale>] Z#<depth>
X[0.0247 *#<scale>] Y[2.8518 *#<scale>] Z#<depth>
G03 X[0.0359 *#<scale>] Y[2.8267 *#<scale>] Z#<depth> I[0.1534*#<scale>] J[0.0535*#<scale>]
G01 X[0.2077 *#<scale>] Y[2.5158 *#<scale>] Z#<depth>
G03 X[0.2191 *#<scale>] Y[2.498 *#<scale>] Z#<depth> I[0.1422*#<scale>] J[0.0786*#<scale>]
G01 X[0.3964 *#<scale>] Y[2.2577 *#<scale>] Z#<depth>
X[0.4395 *#<scale>] Y[2.1992 *#<scale>] Z#<tabdepthstep>
G03 X[0.4487 *#<scale>] Y[2.1878 *#<scale>] Z#<tabdepthstep> I[0.1307*#<scale>] J[0.0964*#<scale>]
G01 X[0.4953 *#<scale>] Y[2.1353 *#<scale>] Z#<tabdepth>
X[0.7027 *#<scale>] Y[1.9016 *#<scale>] Z#<tabdepth>
G03 X[0.7085 *#<scale>] Y[1.8953 *#<scale>] Z#<tabdepth> I[0.1215*#<scale>] J[0.1078*#<scale>]
G01 X[0.9219 *#<scale>] Y[1.6789 *#<scale>] Z#<tabdepth>
X[0.9798 *#<scale>] Y[1.6202 *#<scale>] Z#<tabdepthstep>
G03 X[0.982 *#<scale>] Y[1.618 *#<scale>] Z#<tabdepthstep> I[0.1157*#<scale>] J[0.114*#<scale>]
G01 X[1.0335 *#<scale>] Y[1.5678 *#<scale>] Z#<depth>
X[1.2533 *#<scale>] Y[1.3533 *#<scale>] Z#<depth>
X[1.5074 *#<scale>] Y[1.1 *#<scale>] Z#<depth>
X[1.7309 *#<scale>] Y[0.8607 *#<scale>] Z#<depth>
X[1.9144 *#<scale>] Y[0.6387 *#<scale>] Z#<depth>
X[2.0537 *#<scale>] Y[0.4402 *#<scale>] Z#<depth>
X[2.1486 *#<scale>] Y[0.272 *#<scale>] Z#<depth>
X[2.2042 *#<scale>] Y[0.1418 *#<scale>] Z#<depth>
X[2.2289 *#<scale>] Y[0.0565 *#<scale>] Z#<depth>
X[2.236 *#<scale>] Y[0.0111 *#<scale>] Z#<depth>
X[2.2365 *#<scale>] Y[0.0075 *#<scale>] Z#<depth>
G03 X[2.5583 *#<scale>] Y[0.0091 *#<scale>] Z#<depth> I[0.1607*#<scale>] J[0.0236*#<scale>]
G01 X[2.5634 *#<scale>] Y[0.0467 *#<scale>] Z#<depth>
X[2.5841 *#<scale>] Y[0.1242 *#<scale>] Z#<depth>
X[2.6337 *#<scale>] Y[0.2472 *#<scale>] Z#<depth>
X[2.7216 *#<scale>] Y[0.4096 *#<scale>] Z#<depth>
X[2.8532 *#<scale>] Y[0.6035 *#<scale>] Z#<depth>
X[3.0296 *#<scale>] Y[0.822 *#<scale>] Z#<depth>
X[3.2468 *#<scale>] Y[1.0588 *#<scale>] Z#<depth>
X[3.4966 *#<scale>] Y[1.3098 *#<scale>] Z#<depth>
X[3.5172 *#<scale>] Y[1.3299 *#<scale>] Z#<depth>
X[3.6299 *#<scale>] Y[1.4399 *#<scale>] Z#<tabdepth>
X[3.7661 *#<scale>] Y[1.5727 *#<scale>] Z#<tabdepth>
G03 X[3.7677 *#<scale>] Y[1.5743 *#<scale>] Z#<tabdepth> I[-0.1134*#<scale>] J[0.1163*#<scale>]
G01 X[4.0402 *#<scale>] Y[1.8476 *#<scale>] Z#<tabdepth>
G03 X[4.0455 *#<scale>] Y[1.8531 *#<scale>] Z#<tabdepth> I[-0.115*#<scale>] J[0.1147*#<scale>]
G01 X[4.0716 *#<scale>] Y[1.8819 *#<scale>] Z#<tabdepth>
X[4.1775 *#<scale>] Y[1.9986 *#<scale>] Z#<depth>
X[4.3036 *#<scale>] Y[2.1376 *#<scale>] Z#<depth>
G03 X[4.3123 *#<scale>] Y[2.148 *#<scale>] Z#<depth> I[-0.1203*#<scale>] J[0.1091*#<scale>]
G01 X[4.5393 *#<scale>] Y[2.4446 *#<scale>] Z#<depth>
G03 X[4.5505 *#<scale>] Y[2.4612 *#<scale>] Z#<depth> I[-0.129*#<scale>] J[0.0987*#<scale>]
G01 X[4.7315 *#<scale>] Y[2.7702 *#<scale>] Z#<depth>
G03 X[4.743 *#<scale>] Y[2.7941 *#<scale>] Z#<depth> I[-0.1402*#<scale>] J[0.0821*#<scale>]
G01 X[4.8656 *#<scale>] Y[3.1134 *#<scale>] Z#<depth>
G03 X[4.874 *#<scale>] Y[3.144 *#<scale>] Z#<depth> I[-0.1517*#<scale>] J[0.0582*#<scale>]
G01 X[4.9105 *#<scale>] Y[3.3556 *#<scale>] Z#<depth>
X[4.9299 *#<scale>] Y[3.4681 *#<scale>] Z#<tabdepthstep>
G03 X[4.9321 *#<scale>] Y[3.5032 *#<scale>] Z#<tabdepthstep> I[-0.1601*#<scale>] J[0.0276*#<scale>]
G01 X[4.9317 *#<scale>] Y[3.5113 *#<scale>] Z#<tabdepth>
X[4.9174 *#<scale>] Y[3.8235 *#<scale>] Z#<tabdepth>
G03 X[4.9117 *#<scale>] Y[3.8594 *#<scale>] Z#<tabdepth> I[-0.1623*#<scale>] J[-0.0074*#<scale>]
G01 X[4.8379 *#<scale>] Y[4.1254 *#<scale>] Z#<tabdepth>
X[4.8272 *#<scale>] Y[4.1639 *#<scale>] Z#<tabdepthstep>
G03 X[4.8137 *#<scale>] Y[4.1976 *#<scale>] Z#<tabdepthstep> I[-0.1565*#<scale>] J[-0.0434*#<scale>]
G01 X[4.7752 *#<scale>] Y[4.269 *#<scale>] Z#<depth>
X[4.6655 *#<scale>] Y[4.4725 *#<scale>] Z#<depth>
G03 X[4.6447 *#<scale>] Y[4.5024 *#<scale>] Z#<depth> I[-0.143*#<scale>] J[-0.0771*#<scale>]
G01 X[4.4429 *#<scale>] Y[4.7329 *#<scale>] Z#<depth>
G03 X[4.4151 *#<scale>] Y[4.7581 *#<scale>] Z#<depth> I[-0.1222*#<scale>] J[-0.107*#<scale>]
G01 X[4.1731 *#<scale>] Y[4.9308 *#<scale>] Z#<depth>
G03 X[4.1382 *#<scale>] Y[4.9498 *#<scale>] Z#<depth> I[-0.0944*#<scale>] J[-0.1322*#<scale>]
G01 X[3.8721 *#<scale>] Y[5.0544 *#<scale>] Z#<depth>
G03 X[3.831 *#<scale>] Y[5.0647 *#<scale>] Z#<depth> I[-0.0594*#<scale>] J[-0.1512*#<scale>]
G01 X[3.5574 *#<scale>] Y[5.0959 *#<scale>] Z#<depth>
G03 X[3.5137 *#<scale>] Y[5.0949 *#<scale>] Z#<depth> I[-0.0184*#<scale>] J[-0.1614*#<scale>]
G01 X[3.4099 *#<scale>] Y[5.0786 *#<scale>] Z#<depth>
X[3.2544 *#<scale>] Y[5.0541 *#<scale>] Z#<tabdepth>
X[3.2489 *#<scale>] Y[5.0532 *#<scale>] Z#<tabdepth>
G03 X[3.2084 *#<scale>] Y[5.0413 *#<scale>] Z#<tabdepth> I[0.0252*#<scale>] J[-0.1605*#<scale>]
G01 X[2.9665 *#<scale>] Y[4.9342 *#<scale>] Z#<tabdepth>
G03 X[2.9336 *#<scale>] Y[4.9147 *#<scale>] Z#<tabdepth> I[0.0658*#<scale>] J[-0.1485*#<scale>]
G01 X[2.726 *#<scale>] Y[4.7559 *#<scale>] Z#<tabdepth>
G03 X[2.7161 *#<scale>] Y[4.7477 *#<scale>] Z#<tabdepth> I[0.0987*#<scale>] J[-0.129*#<scale>]
X[2.702 *#<scale>] Y[4.7332 *#<scale>] Z#<tabdepthstep> I[0.1086*#<scale>] J[-0.1208*#<scale>]
G01 X[2.6121 *#<scale>] Y[4.6295 *#<scale>] Z#<depth>
X[2.5361 *#<scale>] Y[4.5418 *#<scale>] Z#<depth>
G03 X[2.5198 *#<scale>] Y[4.5194 *#<scale>] Z#<depth> I[0.1228*#<scale>] J[-0.1064*#<scale>]
G01 X[2.3983 *#<scale>] Y[4.318 *#<scale>] Z#<depth>
(need to break for safego here)
G03 X[2.3876 *#<scale>] Y[4.2969 *#<scale>] Z#<safego> I[0.1391*#<scale>] J[-0.0839*#<scale>]
G01 X[2.3086 *#<scale>] Y[4.109 *#<scale>] Z#<safego>
G03 X[2.302 *#<scale>] Y[4.0899 *#<scale>] Z#<safego> I[0.1498*#<scale>] J[-0.0629*#<scale>]
G01 X[2.2592 *#<scale>] Y[3.9374 *#<scale>] Z#<safego>
G03 X[2.2554 *#<scale>] Y[3.9198 *#<scale>] Z#<safego> I[0.1564*#<scale>] J[-0.0438*#<scale>]
G01 X[2.2391 *#<scale>] Y[3.8205 *#<scale>] Z#<safego>
G03 X[2.2373 *#<scale>] Y[3.8051 *#<scale>] Z#<safego> I[0.1603*#<scale>] J[-0.0262*#<scale>]
G01 X[2.235 *#<scale>] Y[3.7707 *#<scale>] Z#<safego>
G02 X[2.1565 *#<scale>] Y[3.7759 *#<scale>] I[-0.0392*#<scale>] J[0.0026*#<scale>]
G00 Z#<safego>
G90



G00 Z#<safego>
;  no tool change needed T0 M06 
; not end of programM02



o151endwhile




(heart_top)
(final process step)
(MSG, Final Processinf)
X[2.5355 *#<scale>] Y[3.8041 *#<scale>]
Z#<safego>  ;0.0787
G01 Z#<safego>
G02 X[2.4576 *#<scale>] Y[3.7927 *#<scale>] I[-0.0389*#<scale>] J[-0.0056*#<scale>] F1.5
G01 X[2.4447 *#<scale>] Y[3.8817 *#<scale>] Z#<safego>
G03 X[2.4433 *#<scale>] Y[3.8884 *#<scale>] Z#<safego> I[-0.0618*#<scale>] J[-0.0089*#<scale>]
G01 X[2.4058 *#<scale>] Y[4.0331 *#<scale>] Z#<safego>
G03 X[2.4035 *#<scale>] Y[4.0403 *#<scale>] Z#<safego> I[-0.0605*#<scale>] J[-0.0156*#<scale>]
(need to set depth from here)
G01 X[2.3311 *#<scale>] Y[4.2238 *#<scale>] Z#<depth>
G03 X[2.3273 *#<scale>] Y[4.2317 *#<scale>] Z#<depth> I[-0.0581*#<scale>] J[-0.0229*#<scale>]
G01 X[2.2133 *#<scale>] Y[4.4325 *#<scale>] Z#<depth>
G03 X[2.2074 *#<scale>] Y[4.4411 *#<scale>] Z#<depth> I[-0.0543*#<scale>] J[-0.0308*#<scale>]
G01 X[2.0489 *#<scale>] Y[4.6358 *#<scale>] Z#<depth>
G03 X[2.0402 *#<scale>] Y[4.6446 *#<scale>] Z#<depth> I[-0.0484*#<scale>] J[-0.0394*#<scale>]
G01 X[1.8393 *#<scale>] Y[4.8103 *#<scale>] Z#<depth>
G03 X[1.8272 *#<scale>] Y[4.8181 *#<scale>] Z#<depth> I[-0.0397*#<scale>] J[-0.0482*#<scale>]
G01 X[1.5905 *#<scale>] Y[4.9351 *#<scale>] Z#<depth>
G03 X[1.5753 *#<scale>] Y[4.9403 *#<scale>] Z#<depth> I[-0.0276*#<scale>] J[-0.056*#<scale>]
G01 X[1.3133 *#<scale>] Y[4.9936 *#<scale>] Z#<depth>
G03 X[1.2966 *#<scale>] Y[4.9947 *#<scale>] Z#<depth> I[-0.0124*#<scale>] J[-0.0612*#<scale>]
G01 X[1.0233 *#<scale>] Y[4.9761 *#<scale>] Z#<depth>
G03 X[1.0072 *#<scale>] Y[4.9728 *#<scale>] Z#<depth> I[0.0042*#<scale>] J[-0.0623*#<scale>]
G01 X[0.7646 *#<scale>] Y[4.8892 *#<scale>] Z#<depth>
X[0.7386 *#<scale>] Y[4.8803 *#<scale>] Z#<tabdepthstep>
G03 X[0.7247 *#<scale>] Y[4.8735 *#<scale>] Z#<tabdepthstep> I[0.0203*#<scale>] J[-0.059*#<scale>]
G01 X[0.6289 *#<scale>] Y[4.8107 *#<scale>] Z#<tabdepth>
X[0.4776 *#<scale>] Y[4.7115 *#<scale>] Z#<tabdepth>
G03 X[0.4665 *#<scale>] Y[4.7021 *#<scale>] Z#<tabdepth> I[0.0342*#<scale>] J[-0.0522*#<scale>]
G01 X[0.2569 *#<scale>] Y[4.4805 *#<scale>] Z#<tabdepth>
G03 X[0.2485 *#<scale>] Y[4.4693 *#<scale>] Z#<tabdepth> I[0.0454*#<scale>] J[-0.0429*#<scale>]
G01 X[0.2464 *#<scale>] Y[4.4658 *#<scale>] Z#<tabdepth>
X[0.1665 *#<scale>] Y[4.33 *#<scale>] Z#<depth>
X[0.0904 *#<scale>] Y[4.2008 *#<scale>] Z#<depth>
G03 X[0.0847 *#<scale>] Y[4.1881 *#<scale>] Z#<depth> I[0.0538*#<scale>] J[-0.0317*#<scale>]
G01 X[-0.0107 *#<scale>] Y[3.8875 *#<scale>] Z#<depth>
G03 X[-0.0135 *#<scale>] Y[3.8738 *#<scale>] Z#<depth> I[0.0595*#<scale>] J[-0.0189*#<scale>]
G01 X[-0.0196 *#<scale>] Y[3.8005 *#<scale>] Z#<depth>
X[-0.0328 *#<scale>] Y[3.6435 *#<scale>] Z#<tabdepth>
X[-0.0402 *#<scale>] Y[3.5553 *#<scale>] Z#<tabdepth>
G03 X[-0.0399 *#<scale>] Y[3.5417 *#<scale>] Z#<tabdepth> I[0.0622*#<scale>] J[-0.0052*#<scale>]
G01 X[0.0042 *#<scale>] Y[3.2174 *#<scale>] Z#<tabdepth>
G03 X[0.0071 *#<scale>] Y[3.2053 *#<scale>] Z#<tabdepth> I[0.0619*#<scale>] J[0.0084*#<scale>]
G01 X[0.0324 *#<scale>] Y[3.1328 *#<scale>] Z#<tabdepth>
X[0.0844 *#<scale>] Y[2.9841 *#<scale>] Z#<depth>
X[0.1191 *#<scale>] Y[2.8847 *#<scale>] Z#<depth>
G03 X[0.1234 *#<scale>] Y[2.8751 *#<scale>] Z#<depth> I[0.059*#<scale>] J[0.0206*#<scale>]
G01 X[0.2952 *#<scale>] Y[2.5642 *#<scale>] Z#<depth>
G03 X[0.2996 *#<scale>] Y[2.5573 *#<scale>] Z#<depth> I[0.0547*#<scale>] J[0.0302*#<scale>]
G01 X[0.5138 *#<scale>] Y[2.2668 *#<scale>] Z#<depth>
X[0.52 *#<scale>] Y[2.2586 *#<scale>] Z#<tabdepthstep>
G03 X[0.5235 *#<scale>] Y[2.2542 *#<scale>] Z#<tabdepthstep> I[0.0503*#<scale>] J[0.037*#<scale>]
G01 X[0.6175 *#<scale>] Y[2.1483 *#<scale>] Z#<tabdepth>
X[0.7775 *#<scale>] Y[1.9679 *#<scale>] Z#<tabdepth>
G03 X[0.7797 *#<scale>] Y[1.9655 *#<scale>] Z#<tabdepth> I[0.0467*#<scale>] J[0.0414*#<scale>]
G01 X[0.9723 *#<scale>] Y[1.7702 *#<scale>] Z#<tabdepth>
X[1.051 *#<scale>] Y[1.6904 *#<scale>] Z#<tabdepthstep>
G03 X[1.0518 *#<scale>] Y[1.6896 *#<scale>] Z#<tabdepthstep> I[0.0445*#<scale>] J[0.0438*#<scale>]
G01 X[1.0835 *#<scale>] Y[1.6587 *#<scale>] Z#<depth>
X[1.3235 *#<scale>] Y[1.4245 *#<scale>] Z#<depth>
X[1.5793 *#<scale>] Y[1.1696 *#<scale>] Z#<depth>
X[1.806 *#<scale>] Y[0.9267 *#<scale>] Z#<depth>
X[1.994 *#<scale>] Y[0.6994 *#<scale>] Z#<depth>
X[2.1384 *#<scale>] Y[0.4936 *#<scale>] Z#<depth>
X[2.2384 *#<scale>] Y[0.3163 *#<scale>] Z#<depth>
X[2.2985 *#<scale>] Y[0.1754 *#<scale>] Z#<depth>
X[2.3267 *#<scale>] Y[0.0782 *#<scale>] Z#<depth>
X[2.3349 *#<scale>] Y[0.0261 *#<scale>] Z#<depth>
X[2.3355 *#<scale>] Y[0.0221 *#<scale>] Z#<depth>
G03 X[2.4592 *#<scale>] Y[0.0227 *#<scale>] Z#<depth> I[0.0618*#<scale>] J[0.009*#<scale>]
G01 X[2.4652 *#<scale>] Y[0.0664 *#<scale>] Z#<depth>
X[2.4891 *#<scale>] Y[0.1559 *#<scale>] Z#<depth>
X[2.5431 *#<scale>] Y[0.2898 *#<scale>] Z#<depth>
X[2.636 *#<scale>] Y[0.4616 *#<scale>] Z#<depth>
X[2.7728 *#<scale>] Y[0.6631 *#<scale>] Z#<depth>
X[2.9538 *#<scale>] Y[0.8873 *#<scale>] Z#<depth>
X[3.1745 *#<scale>] Y[1.1279 *#<scale>] Z#<depth>
X[3.4262 *#<scale>] Y[1.3809 *#<scale>] Z#<depth>
X[3.4848 *#<scale>] Y[1.438 *#<scale>] Z#<depth>
X[3.5975 *#<scale>] Y[1.5479 *#<scale>] Z#<tabdepth>
X[3.6963 *#<scale>] Y[1.6443 *#<scale>] Z#<tabdepth>
G03 X[3.6969 *#<scale>] Y[1.6449 *#<scale>] Z#<tabdepth> I[-0.0436*#<scale>] J[0.0447*#<scale>]
G01 X[3.9651 *#<scale>] Y[1.9139 *#<scale>] Z#<tabdepth>
X[3.9694 *#<scale>] Y[1.9182 *#<scale>] Z#<tabdepthstep>
G03 X[3.9715 *#<scale>] Y[1.9203 *#<scale>] Z#<tabdepthstep> I[-0.0442*#<scale>] J[0.0441*#<scale>]
G01 X[4.0712 *#<scale>] Y[2.0302 *#<scale>] Z#<depth>
X[4.2295 *#<scale>] Y[2.2048 *#<scale>] Z#<depth>
G03 X[4.2329 *#<scale>] Y[2.2088 *#<scale>] Z#<depth> I[-0.0462*#<scale>] J[0.0419*#<scale>]
G01 X[4.4599 *#<scale>] Y[2.5054 *#<scale>] Z#<depth>
G03 X[4.4642 *#<scale>] Y[2.5118 *#<scale>] Z#<depth> I[-0.0496*#<scale>] J[0.0379*#<scale>]
G01 X[4.6452 *#<scale>] Y[2.8208 *#<scale>] Z#<depth>
G03 X[4.6496 *#<scale>] Y[2.83 *#<scale>] Z#<depth> I[-0.0539*#<scale>] J[0.0315*#<scale>]
G01 X[4.7722 *#<scale>] Y[3.1492 *#<scale>] Z#<depth>
G03 X[4.7755 *#<scale>] Y[3.161 *#<scale>] Z#<depth> I[-0.0583*#<scale>] J[0.0224*#<scale>]
G01 X[4.8173 *#<scale>] Y[3.4036 *#<scale>] Z#<depth>
X[4.8314 *#<scale>] Y[3.4851 *#<scale>] Z#<tabdepthstep>
G03 X[4.8322 *#<scale>] Y[3.4986 *#<scale>] Z#<tabdepthstep> I[-0.0615*#<scale>] J[0.0106*#<scale>]
G01 X[4.8294 *#<scale>] Y[3.5597 *#<scale>] Z#<tabdepth>
X[4.8175 *#<scale>] Y[3.8189 *#<scale>] Z#<tabdepth>
G03 X[4.8153 *#<scale>] Y[3.8327 *#<scale>] Z#<tabdepth> I[-0.0624*#<scale>] J[-0.0028*#<scale>]
G01 X[4.7498 *#<scale>] Y[4.069 *#<scale>] Z#<tabdepth>
X[4.7309 *#<scale>] Y[4.1372 *#<scale>] Z#<tabdepthstep>
G03 X[4.7256 *#<scale>] Y[4.1502 *#<scale>] Z#<tabdepthstep> I[-0.0602*#<scale>] J[-0.0167*#<scale>]
G01 X[4.6911 *#<scale>] Y[4.2142 *#<scale>] Z#<depth>
X[4.5775 *#<scale>] Y[4.425 *#<scale>] Z#<depth>
G03 X[4.5695 *#<scale>] Y[4.4365 *#<scale>] Z#<depth> I[-0.055*#<scale>] J[-0.0296*#<scale>]
G01 X[4.3677 *#<scale>] Y[4.667 *#<scale>] Z#<depth>
G03 X[4.357 *#<scale>] Y[4.6767 *#<scale>] Z#<depth> I[-0.047*#<scale>] J[-0.0411*#<scale>]
G01 X[4.115 *#<scale>] Y[4.8494 *#<scale>] Z#<depth>
G03 X[4.1016 *#<scale>] Y[4.8567 *#<scale>] Z#<depth> I[-0.0363*#<scale>] J[-0.0508*#<scale>]
G01 X[3.8355 *#<scale>] Y[4.9614 *#<scale>] Z#<depth>
G03 X[3.8197 *#<scale>] Y[4.9653 *#<scale>] Z#<depth> I[-0.0228*#<scale>] J[-0.0581*#<scale>]
G01 X[3.5461 *#<scale>] Y[4.9965 *#<scale>] Z#<depth>
G03 X[3.5293 *#<scale>] Y[4.9962 *#<scale>] Z#<depth> I[-0.007*#<scale>] J[-0.062*#<scale>]
G01 X[3.4476 *#<scale>] Y[4.9833 *#<scale>] Z#<depth>
X[3.292 *#<scale>] Y[4.9588 *#<scale>] Z#<tabdepth>
X[3.2644 *#<scale>] Y[4.9545 *#<scale>] Z#<tabdepth>
G03 X[3.2488 *#<scale>] Y[4.9499 *#<scale>] Z#<tabdepth> I[0.0097*#<scale>] J[-0.0617*#<scale>]
G01 X[3.007 *#<scale>] Y[4.8428 *#<scale>] Z#<tabdepth>
G03 X[2.9943 *#<scale>] Y[4.8353 *#<scale>] Z#<tabdepth> I[0.0253*#<scale>] J[-0.0571*#<scale>]
G01 X[2.8359 *#<scale>] Y[4.714 *#<scale>] Z#<tabdepth>
X[2.7868 *#<scale>] Y[4.6765 *#<scale>] Z#<tabdepthstep>
G03 X[2.7775 *#<scale>] Y[4.6678 *#<scale>] Z#<tabdepthstep> I[0.0379*#<scale>] J[-0.0496*#<scale>]
G01 X[2.7232 *#<scale>] Y[4.605 *#<scale>] Z#<depth>
X[2.6117 *#<scale>] Y[4.4763 *#<scale>] Z#<depth>
G03 X[2.6054 *#<scale>] Y[4.4677 *#<scale>] Z#<depth> I[0.0472*#<scale>] J[-0.0409*#<scale>]
G01 X[2.4839 *#<scale>] Y[4.2663 *#<scale>] Z#<depth>
G03 X[2.4798 *#<scale>] Y[4.2582 *#<scale>] Z#<depth> I[0.0535*#<scale>] J[-0.0322*#<scale>]
G01 X[2.4008 *#<scale>] Y[4.0703 *#<scale>] Z#<depth>
G03 X[2.3983 *#<scale>] Y[4.0629 *#<scale>] Z#<depth> I[0.0576*#<scale>] J[-0.0242*#<scale>]
(need to set safego from here)
G01 X[2.3555 *#<scale>] Y[3.9104 *#<scale>] Z#<safego>
G03 X[2.354 *#<scale>] Y[3.9036 *#<scale>] Z#<safego> I[0.0601*#<scale>] J[-0.0168*#<scale>]
G01 X[2.3378 *#<scale>] Y[3.8043 *#<scale>] Z#<safego>
G03 X[2.3371 *#<scale>] Y[3.7984 *#<scale>] Z#<safego> I[0.0616*#<scale>] J[-0.01*#<scale>]
G01 X[2.3348 *#<scale>] Y[3.764 *#<scale>] Z#<safego>
G02 X[2.2562 *#<scale>] Y[3.7693*#<scale>] I[-0.0392*#<scale>] J[0.0026*#<scale>]


G00 Z#<safego>
(end of millBlank)


T16 M06 ; ready for engrave

(go to home)
Z1.0000
G00 G53 X0 Y0  Z0
Z1.0000
M02

%